Advanced: Cylindrical Gear Design, Analysis and Optimization

The objective of the 4-day training is to understand the fundamental theories for cylindrical gear design and analysis and to learn the application usages of KISSsoft. Participants will gain knowledge on how to interpret the gear rating, analyze reports and apply the software to improve gear design from the conceptual to the final design phase.

The training is designed for engineers who are already familiar with cylindrical gear calculations and basic functionalities of KISSsoft. If a participant has a lack of knowledge on gears or KISSsoft usages and user interface, we highly recommend going through the KISSsoft tutorials posted on our website before the training.

You will need a notebook to actively participate in the training course.
If you do not have a notebook, we are happy to provide one, tick the relevant part of the application form below.
 Hardware and software requirements
Travel plug
Bring a travel plug for a Swiss power supply socket.

Type: Advanced
Language: English
Costs: 2200 EUR


October 20 2020 | Week 43
09:00 - 17:00 | Tuesday
October 21 2020 | Week 43
09:00 - 17:00 | Wednesday
October 22 2020 | Week 43
09:00 - 17:00 | Thursday
October 23 2020 | Week 43
09:00 - 17:00 | Friday
Duration: 4 Days
The training starts with the geometric definitions and properties, manufacturing and inspection techniques of cylindrical gears. Day 2 explains in -depth knowledge on gear failure modes and strength rating methods. Day 3 explores contact analysis regarding tooth load and stress, stiffness, transmission error, vibration and noise as well as other important results under actual operating condition. During the last day participants will apply the knowledge built in the previous days on gear design and optimization exploring various strategies by using KISSsoft sizing functionalities.


Your details

Form of address*

Mr                Mrs

First name*

Last name*


E-mail address*

Phone number*


Your note

How did you find out about our seminars?

Yes, I need a computer for the seminar. If you are not able to bring a notebook with you, we are happy to provide one.

Mandatory boxes are shaded in gray*

Billing address



First line of address*


Zip code*



Note on the bill

October 20 - October 23 2020 | 4 Days
2200 EUR

Yes, I would like to receive information about trainings via e-mail

Mandatory boxes are shaded in gray*

KISSsoft AG - A Gleason Company | Rosengartenstrasse 4 | 8608 CH-Bubikon
Tel: +41 55 254 20 50 | info@KISSsoft.AG | Data Protection Regulations

Calculation software for machine design - Design, Analyse, Optimize